These four functions are enough for a home villa elevator!

Installing a home elevator in your house is cost-effective in addition to having a comfortable seating feeling. Many people are worried about its safety factor. Which home elevator installation is called safety? In fact, if the home elevator installed at home has four functions, it can be used with confidence.


1. Home elevator-the role of overweight repair

When office workers rushed into the crowded elevator on the spot, the elevator rang. I believe your heart is very embarrassed at this moment. Similarly, a device similar to an electronic scale is installed at the bottom of the home elevator car. Once the load of the home villa elevator exceeds its own weight, the elevator will sound an alarm, will not run, and always keep the door open to ensure user safety.


2. Home villa elevator rope breaking protection function

Install the speed limiter and safety clip in the main room of the home elevator. The speed limiter is a mechanical device used to test the speed of the elevator car. Set its larger speed limit speed. The safety clip is installed at the bottom of the car. This is a device close to the brake pedal. Once the galvanized steel wire rope of the home elevator breaks, the speed of the elevator car will exceed the maximum speed limit set by the speed limiter. The speed limiter will pinch the galvanized steel wire rope and drive the safety clamp to lock the elevator car on the slide rail to prevent the elevator car from falling again to ensure customer safety.


3. Home Elevator Installed in the Home - Limit Maintenance Function

The home elevator is equipped with a limit switch. This has the ability of full automatic calibration. When the home elevator runs to the upper limit position, the limit power switch is effective. The home elevator cannot rise again, but the elevator car can descend at this time. When the elevator car descends, the limit power switch will automatically calibrate.


4. Home Villa Elevator Power-off Self-rescue Function

The operation of the home villa elevator requires power. When it is not running, it is in standby mode, with almost no power consumption, and the usual power consumption is very small. After the home villa elevator system is cut off, it will automatically identify the current car load status, automatically run to the nearest floor, open the car door, release the user, and wait for inspection when the car door is opened for a long time.